Car paint oxidation removal is an unfortunate necessity to owning a vehicle because it not only ruins the visual appeal of the exterior, but it can become very dangerous if left untreated on headlights since it will limit visibility. There are a few different tiers that help eradicate its negative effects, but it must be clear immediately that even though you should thoroughly rinse your car first, a machine operated wash will not dispose of the problem. All washing a vehicle does is prep the metal to get rid of oxidation altogether.
“To deliver the best results, you are going to want to literally get in between the compounds and clean out the impurities that will prevent oxidation from being disturbed. First, cut up a clay bar so you have numerous fresh surfaces to work on”
Use Oxidation Cleaner Or Baking Soda Toothpaste On Headlights
Though not required, if you are new to this type of exercise, starting with the headlights is a wise idea because the areas are small and the positive impact is more noticeable. Spray each beam with warm water and wipe with a microfiber towel so the plastic is free of bumps. Using an applicator pad, place oxidation liquid detergent in the palm and buff it out with medium pressure with your hand or orbital device. Baking soda toothpastes can serve as a fill in replacement if you cannot acquire the correct cleaner. A sign that the process is successful is that the headlight appears shiny and not cloudy or brown-colored. Oxidation leaves a thin, hard film over plastic and metal, so once you see your beam bulbs underneath, the job for this space is complete.
Lift Contaminants With A Clay Bar
To deliver the best results, you are going to want to literally get in between the compounds and clean out the impurities that will prevent oxidation from being disturbed. First, cut up a clay bar so you have numerous fresh surfaces to work on. The reason for this is because as you start to rub the clay over the body, it will pick up dirt and debris. To continue to use this same piece of clay will just spread the contaminants instead of merely lifting them. The accompanying clay lubricant should be sprayed liberally in manageable regions so that you are not spreading each clay piece too thin. The solution is vital because without it the clay will stagger and eventually stick to the finish. Gliding the clay in the same direction repeatedly, a click noise will tell you that sand and bug residue is being cleared. Clay bars offer you a clean slate before using additional substances.
Compounds Over Polish And Wax
Even though polishing and waxing a car are extremely advantageous, in actuality they do very little in removing oxidation, at least initially. A sealant can be placed on the car last, but after using a clay bar, heavy correcting compound should be dispensed on a soft pad and rubbed in by sections using an electric orbital machine. You can use your hand for this stage, but it will not give you the even appearance you desire. After the entire car has been addressed panel by panel with the heavy substance, the same exact step should be repeated with correcting polish, and then topped off with finishing polish. The chronology of each compound is to fill in scratches, smooth over spider webs, and polish out swirl marks.
Obtaining a flawless oxidation removal requires training that professional auto detailers have undergone to become professionals in their craft. With hundreds of jobs under their belt, they can promise results that will keep your vehicle from facing further oxidation for much longer.