How To Align Garage Door Sensors In 10 Easy Steps

Garage door sensors are an important safety feature of your garage door. They help to prevent the door from closing on someone or something. If the sensors are not properly aligned, they may not work properly. This blog post will show you how to align garage door sensors in 10 easy steps!

What Are Garage Door Sensors?

Garage door sensors are a pair of safety devices located on either side of the garage door. They work by sending an infrared beam across the door opening. If something breaks the beam, the alarm will sound, and the garage door will stop moving.

Why Do I Need to Align My Garage Door Sensors?

If your garage door sensors are not properly aligned, they may not work properly. It could potentially lead to someone getting injured, or your car being damaged. It is important to ensure that your garage door sensors are aligned perfectly to do their job properly!

How To Align Garage Door Sensors – Step By Step Guide

If your garage door sensors are not working properly, it is important to check the alignment. Improperly aligned sensors can cause the door to close on someone or something, which can be dangerous. This blog post will show you how to align garage door sensors in ten easy steps!

Step 1: Check the batteries. Garage door sensors run on batteries, which is likely due to low battery power if they are not working properly. Check the batteries and replace them if necessary.

Step 2: Inspect the sensor eyes. The sensor eyes should be clean and free of debris. If anything is blocking the sensor eyes, such as dirt or dust, clean it off with a soft cloth.

Step 3: Check the alignment of the sensors. The sensors should be aligned parallel to each other. If not, use a screwdriver to adjust them until they are in line.

Step 4: Make sure the sensors are facing each other correctly. The sensors should be facing directly at each other so that when the door opens, the light beams will intersect and create an “on” signal.

Step 5:

• Test the sensor alignment by opening and closing the garage door manually.
• Once you have adjusted the sensors as necessary, test them by manually opening and closing the garage door.
• Do this slowly and deliberately so that you can ensure that the door is properly closing on its own.

Step 6: Close the garage door and test the remote. Once you have ensured that the sensors are aligned correctly, close the garage door and then test the remote. Make sure that the door opens and closes smoothly when using the remote.

Step 7: If necessary, adjust the sensitivity of the sensors. If you find that the garage door is still not closing properly, you may need to adjust the sensitivity of the sensors. It can usually be done by turning a knob or screw on the sensor itself.

Step 8: Test the garage door again. After making any adjustments to the sensors, it is important to test the garage door again to make sure that it is working properly.

Step 9: Repeat steps four through eight as necessary. If you find that the garage door is still not closing properly, you may need to repeat steps four through eight. Be sure to test the garage door after each adjustment.

Step 10: Secure the sensors in place. Once you have aligned the sensors properly, it is important to secure them in place so that they do not move again. This can usually be done by using screws or bolts to attach the sensor to the wall or ceiling.

Conclusion

Garage door sensors are an important safety feature of your garage door system. If they are not aligned properly, they may not detect an obstacle and potentially cause a dangerous situation. In this article, we have provided step-by-step instructions on aligning garage door sensors. Following these simple steps should help ensure that your garage door operates safely and correctly. If you have followed these steps and the garage door still isn’t closing properly, there may be a problem with the sensors. In this case, you will need to call a professional to help diagnose and fix the issue.

The post How To Align Garage Door Sensors In 10 Easy Steps appeared first on Garage Door Repair San Antonio.