How To Build A Roofed Patio Attached To The House

Install The Joists And Joist Hangers

Nail through the joist hangers into the beams at the house to hold them in place. Then connect the opposite ends of the two beams at the front with a 2×10 cut to the same length as the ledger. Adjust the resulting frame until the diagonal measurements are equal.

Then brace the frame against stakes pounded into the ground to hold it square while you install the treated posts, joists and decking. Sight along the outside rim joist occasionally and adjust the length of the joists as needed to keep the front rim joist straight.

What Youll Need To Attach A Patio Roof To An Existing House:

• Wooden Beams
• Ledger
• Utility Knife

• Beginning from the roof to the house , calculate the sightline clearance height.
• After that, determine the beam size youll want to use.
• Then, choose a roof pitch and roof structure.
• Because youre installing your roof on top of your existing roof, youll want to consider whether to remove the existing eave or keep it.
• Next, determine how many beams, rafters, and roofing planks youll need for your design.
• Stain your wood pieces to protect them from outdoor elements.
• Then, fasten the post bases to the ground using lag bolts and a screwdriver and make sure they sit plumb.
• Cut one side of the horizontal roof beam on an angle so that the rafters sit flush on it.
• Using your nail gun, attach the horizontal beam and cut the two outer rafters to sit flush on top of the existing house roof.
• Install the two outer rafters and attach a plain rafter beam to the very edge of the existing roof.
• As you continue to install your rafters, cut the house end of each one so that it fits over top of the plain rafter beam.
• Once all of the rafters are in place, attach your planks horizontally across the rafters to form your patio roof.
• If youre covering the patio roof with shingles that match your existing roof, install black roofing felt and a layer of oriented strand board.
• After that, you can attach your roofing shingles.

• *Photo courtesy of;blogbeen.com

  Finding The Right Tools For Installing A Patio Roof

  Image source: Michelle Walker architects

  Attaching a patio roof to an existing house is no easy job. It is doable, but it takes a lot of motivation and attention. Besides strong morale, youll also need the appropriate tools to get this project completed. Patio roofs can be dangerous if they are not installed properly, especially if the area in which you live in is known for harsh weather conditions that often cause roof damage. In order to avoid any risk and to keep yourself and the ones around you safe, make sure you use tools correctly. Youll need:

  • Carpenters pencil to mark spots
  • Level
  • Ledger

  Read Also: Wood Deck Over Concrete

  How To Attach A Patio Roof To An Existing House

  When you attach a patio roof to an existing house, you can create a patio look that flows from roof out. Creating this patio roof requires some woodworking knowledge and patients, but if you have the skills and time, you can make it work. Here, our roofing experts explain how to attach a patio roof to an existing house.

  Covered Patio Roof Design Ideas

  

  Featured Image: London Garden Designer

  Whether you love to read, enjoy a drink, or perhaps doze off by the swimming pool, a covered patio is able to make your backyard experience a lot more pleasant. Covering the deck is going to protect your space from the environmental components and keep things cool so you can hang out as long as you would like. Not only do wood patio covers produce shade, they likewise provide a chance to do something creative overhead like florals, lighting effects, and much more for the patio roof. Go ahead and check out these 39 covered patio ideas to make your outdoor space more fun and relaxing.

  You May Like: Removing Sliding Patio Doors

  Can You Put A Ledger Board Over Siding

  In order to install the ledger board , you usually need to remove the houses siding . Never install a ledger board over the top of siding no matter what you hear, this can weaken the connection. Aluminum and vinyl siding can easily be removed with tin snips from an area one foot surrounding the ledger board location.

  Attach Trim And Sill To The Outer Walls

  Nail a 2×10 trim board over the outside joist, 1-1/2 in. below the top surface of the deck. Cut a 2×4 sill piece to width and bevel the top on a table saw. Miter the ends and nail the sill to the top of the 2×10 trim board.

  This illustration shows how the corners are assembled and the trim is installed.

  Recommended Reading: How To Get Dog Hair Off Patio Cushions

  Benefits Of Covered Patio

  You will find many advantages to developing an excellent backyard porch cover, and lots of individuals decide to produce an outdoor covering, so they are able to comfortably spend some time outside. In case you are planning a covered patio project, you may have to talk to a professional, though some choices are less involved. Continue reading for a number of amazing ideas to help with your backyard DIY patio cover project, and look for the one that works for your house style, finances, and area. As warmer nights and sunny days approach, it is the best moment to focus on the deck you have been neglecting. Although it is outdoors, it is nonetheless a part of your property and must really feel connected to the rest of your house, so provide it with some love. Allow it to be a favorable spot for a quick day retreat or perhaps an amiable dinner under the stars. Whether you would like your patio to act like a dining area, a fireside lounge, or maybe a full-on family room, we have here 39 covered patio ideas to bring the comfort outside of your home.

  Two Videos Cover The Design Questions And Construction Process Of A Post And Beam Patio Roof Structure

  How To Build A Patio Cover Attached To The House

  Video 1: Design a Roof extension over an existing patio

  Existing patio is outside the dining room on the west side of the house. the patio is essentially unusable on a sunny afternoon in the summer.

  This video looks at a couple of design options, including attaching the roof ledger below that of the existing eaves and setting the patio roof atop the existing roof.

  The latter option was chosen because the low roof and roof beam would have blocked the view from the dining area. Did we say that the house is in Bozeman, MT, where the view is worth viewing?

  Work from the view back, not from the house, out.

  • Calculate the sightline clearance height, about 6 feet, 2 inches, in this case.
  • Determine the beam size: 8 inches in this case.
  • Choose a roof pitch and roof structure

  This places the new roof on top of the existing roof. The next question is what to do with the existing eave under the new roof: kick it or keep it?

  To tie the design together, Peter chose to cut the rafter tails off the extend the exterior wall up to the underside of the new roof. As it turned out, the existing roof structure is a truss system, but they were able to contact the original truss manufacturer to verify that cutting the tails off would not jeopardize the structural integrity of the trusses.;

  From the we-hope-this-is-obvious desk: Never alter engineered trusses without the approval of a licensed professional engineer. Ever.

  The next design decision: material selection

  Video 2: Construction process

  Read Also: How To Keep Chipmunks Off Patio Furniture

  Where To Attach A Patio Roof Ledger

  On a one-story house, it is often best to attach the ledger for a patio roof just below the houses eaves.

  On a two-story house, you can usually tie the ledger into a band joist , located between the floors, as shown below. Find the band joist by measuring down from a second-story window.

  Browse Tools for This Project on Amazon

  Insulated Patio Roof Panels Cost

  The cost of an insulated patio roof ranges from $26 to $59 a square foot installed. Insulated patio roof panels help prevent the patio from becoming overheated. This is a particularly good idea if your patio has some type of enclosure or walls like a gazebo. Insulated panels can be made of fiberglass, aluminum, or wood. They come in several different styles and can be added to many different types of roofs or covers. The material being insulated and the overall structure style dictate the final cost.

  Don’t Miss: How To Install Ceiling Fan On Insulated Aluminum Patio

  Louvered Patio Cover Cost

  The cost of a louvered patio cover is between $4,320 and $20,700. This makes the total cost of a patio with a louvered roof between $6,048 and $26,100. Louvered roofs come in many configurations and materials. A roll-formed roof is the least expensive. This is a thinner type of slat material. An extruded roof is the most expensive. This is a more durable and longer-lasting roof option, but costs can approach $100 a square foot if you choose to include all the options.

  Fabulous Small Patio Ideas To Make Most Of Small Space

  

  These DIY patio cover plans will show you how to cover an existing patio so you can enjoy the outdoor space more during the summer. Construct a covering so the area will be shaded and provide you with an increased outdoor living space for you and your family.

  Building a patio cover will improve the appearance of your home, increase the value of your home, and increase the amount of time you can use the outdoor space every year.

  One of these 21 DIY patio cover plans will be just right to meet your roofing needs so check them out today.

  You may also like to check out my other interesting and relevant articles such as: small patio ideas, patio decorating ideas, diy pergolas and diy gazebo plans.

  Don’t Miss: How To Identify Vintage Wrought Iron Patio Furniture

  Tempered Glass Patio Roof

  If you are looking for patio roof that allows you to get natural light as well as protecting you from the rain and snow, tempered glass will be your greatest bet.

  The transparency of the tempered glass allows you to stay in the patio while enjoying the view of the surrounding including what is over the roof. It is a bit pricey, though.

  Also read: Floor to Ceiling Windows Cost and Ideas

  Now you know how to attach a patio roof to an existing house and some patio roof ideas. Attaching a patio roof is not that hard, isnât it?

  But, you had better not install it by yourself. Having some assistance will be a terrific idea.

  Does A Pergola Add Value To Your Home

  Heres what we tell our customers: yes, a pergola will add market value to any house . Since outdoor living has become more popular than ever, the value of properties with a pergola or a comfortable outdoor space has been on the rise. A safe gauge for a deck or backyard improvement is about 50% 80% for your ROI.

  Recommended Reading: How To Remove Mildew From Patio Furniture Cushions

  Most Common Ways To Attach A Patio Roof To An Existing House

  Attaching a patio roof entails intermediate carpentry skills and creativity because there are many ways that you can choose from.

  All of them have their own advantages and drawbacks. When installed correctly, the patio roof will complement the house and provide an extra entertainment for you and your family for all year round.

  Here are 7 different ways of attaching a patio roof to an existing house that you can apply.

  Flashing A Patio Roof Ledger

  I built a cover for my patio. How to build a covered patio DIY video.

  Unless it will be protected from rain by the houses eaves or a solid roof, a roof ledger that is fastened directly to a house with wood siding should be capped with galvanized metal Z-flashing that tucks up under siding to prevent water from seeping in behind it.

  Where integral flashing isnt possible, such as on a stucco wall, use Z-flashing and caulk the top edge. This is a job you must do before fastening the overheads roof rafters in place.

  You can buy L- or Z-shaped flashing or bend it yourself. To bend sheet-metal flashing, make a form by clamping two 2 by 4s together on each side of the metal, and then hammer the metal to create a sharp edge at each fold.

  Fit the flashing in place, caulk the top edge, and nail it with galvanized nails long enough to penetrate at least 1 inch into the structural members. Then caulk the nail heads.

  If the house is sided with shingles or lap siding, simply slip the metals top edge up under the bottom edge of the shingles or siding as far as possible.

  NEXT SEE:

  Recommended Reading: How To Stop A Patio Umbrella From Spinning

  Install The Ridge And Rafters

  Cut the 2×8 roof plates. If you’re not good at calculating roof angles, start by estimating the angles and cutting the plates an extra 6 in. long. Then set them in place, remark the angles and recut them until they fit. Screw the roof plates through the roof boards into the rafters below. Next measure for the ridge, estimate the angle and cut it a little long. Trim the angle to fit and screw the ridge rafter to the first truss and roof plates. Complete the tie-in by installing a pair of rafters. The framing should be exactly 3/4 in. above the top of the trusses.

  Aluminum Patio Roof Cost

  The cost of an aluminum patio roof cover averages $20 to $70 a square foot installed. There are many different aluminum types for patios. You can find aluminum lattice, pergolas, and panels that come in several different gauges. Aluminum can be louvered, installed in slats, or combined with other materials. The thicker the aluminum, the longer-lasting its appearance but the higher its cost. Extruded aluminum costs more than rolled aluminum. Insulated aluminum costs more than extruded and rolled.

  Read Also: How To Install A Pergola On A Paver Patio

  Cost To Screen In A Covered Patio

  If your patio has a hard cover, meaning not an awning or one of fabric, and it is solid, not louvered or a pergola, you can screen the sides. This essentially creates a patio enclosure, which helps keep bugs, the sun, and the rain out. The cost to screen a patio is $5 to $7 a square foot if the patio already exists. Building a covered, screened-in patio averages $30 to $47 a square foot, depending on the patio material you choose and the cover.

  Where The Patio Cover Attaches To The Roof

  

  More detail about joining the patio cover to the existing roof.

  Jed Fisher

  This article is accurate and true to the best of the authors knowledge. Content is for informational or entertainment purposes only and does not substitute for personal counsel or professional advice in business, financial, legal, or technical matters.

  Read Also: How To Restore Cast Aluminum Patio Furniture

  Roof Attached House Outdoor Patio How To Attach A An Existing Wonderful Objects In Blender Bike Toadult

  Adding a roof to your porch provides you and with much needed protection from the sun wind rain snow ice however must ensure new. How to attach a patio roof an existing house cover plans these describe built, watch on how to attach a patio roof an existing house over deck from or add porch.

  Attaching pergolas to vinyl siding find this pin and more on deck ideas by stan davis onward hardware is the leading distributor of builders, how to attach a patio or verandah house st option attached below original gutter on fascia nd remove, a ledgerheader board is the first step if you are attaching patio roof to an existing structure placement of determines level. The best way to cover a deck or patio is by building permanent roof over it thats attached your home watch this video find out more. Instructions locate the ledger first is by to be nailed into place it will run width of patio and roof attached, when you attach a patio roof to an existing house can create look that flows from out creating this requires some woodworking knowledge. I want to build a patio cover slanted roof over my what would be the best way attach rafters side of house have.

  • Size : 950 x 633 Pixel
  • Watched : 17 Times Read By User

  Covered Patio Drainage Cost

  While some covered patios keep the rain off the patio, it is always a good idea to make sure that your patio slopes and drains away from your home effectively. This is particularly true for patios located against the house and covered patios that do not have protection from the rain.

  Depending on the grade, location, and how well your patio is covered, you have two choices for draining the area – a drainage slope and a . You may find that one is the right fit for your patio or possibly a combination.

  Drainage slopes do not have additional costs because they are incorporated into the patio layout and placement. A French drain can do a better job at draining water away from your home and directing it elsewhere, but it will have higher costs. French drains are essentially perforated pipes that carry water away from the patio area.

  Below are the average costs for a 12 x 18 covered patio that has been installed with each option.

  Drainage Type

  $100 – $200

  You May Like: How To Replace Fabric On Patio Chairs

  
  
  Via https://www.lovemypatioclub.com/how-to-build-a-roofed-patio-attached-to-the-house/