How To Build A Covered Patio Attached To House

Covered Patio With A Fireplace Cost

The cost of an outdoor fireplace is $1,500 to $20,000 on average. This makes the average range of a covered patio with a fireplace installed between $4,524 and $38,792 for a living room-sized patio. If you choose to install an outdoor fireplace, you want a larger patio, designed to be an outdoor living room or kitchen. This gives you plenty of room to install the fireplace and have seating and entertaining areas. Smaller patios may not accommodate both comfortably. Outdoor fireplaces can run on both wood and gas/propane.

Modern In South Africa

The South African firm LevEco Architects designed an overhead with a ceiling made from IsoPine, which is a composite polystyrene material that functions well outside, provided it doesn’t get direct rain. The timber roof rafters are pocketed into the brickwork of the house, so you don’t see any connections. The roof sheeting is attached with flashing and waterproofing. 

Choose The Type Of Wood To Use

Another consideration for this project was the type of wood to use.  After comparing the cost and aesthetics of cedar vs fir, cost overruled looks for us and at a third less was the more viable choice.

The Sikkens teak cedar stain turned the #2 fir beautiful, but the one time that the can was shaken and not stirred, the wood was a lot lighter because the pigment was at the bottom of the gallon can.

Read Also: How To Remove Tree Sap From Patio Furniture

Fabulous Small Patio Ideas To Make Most Of Small Space

These DIY patio cover plans will show you how to cover an existing patio so you can enjoy the outdoor space more during the summer. Construct a covering so the area will be shaded and provide you with an increased outdoor living space for you and your family.

Building a patio cover will improve the appearance of your home, increase the value of your home, and increase the amount of time you can use the outdoor space every year.

One of these 21 DIY patio cover plans will be just right to meet your roofing needs so check them out today.

You may also like to check out my other interesting and relevant articles such as: small patio ideas, patio decorating ideas, diy pergolas and diy gazebo plans.

Hdblogsquad // How To Build A Covered Patio

Like I mentioned on last nights live Periscope tour, I am overjoyed with how our new patio cover turned out! Its such a beautiful space that definitely adds to our backyard appeal. It feels great knowing that space is finished and we have the entire summer to enjoy it! #BringOnTheBBQs

Yesterdays post captured the majority of my feelings towards the backyard, and highlighted a lot of the DIY projects weve done to date. In this post I want to show you exactly what went into building the patio cover and hopefully convince you that its easy to take on a large backyard DIY project when you have the experts on your side.

So lets jump right back in! With project material list & sketch in hand, we visited our good friend David at the deck & fence design center. He reviewed our sketch, and after asking a few questions helped us order our materials. Because we needed a large amount of lumber we opted to order all of our materials at The Home Depot store and then have it shipped directly to our driveway . Once we had all the lumber and tools in hand we got down and dirty and started our project. While the instructions that follow are specific to our project, they will vary based on your patio project, plan and material list. Obviously you would want to do what works best in your backyard!

You May Like: Does Rooms To Go Sell Patio Furniture

Patio Ideas Backyard Attached Covered Cover Plans Outdoor Living Structures Easy

Framing a patio cover structures plan heres the professional deck builder provides builders with news and information on decks outdoor living. We specialize in custom designed built patio covers pergolas car ports outdoor kitchens and living spaces the houston area, we are master purveyors of fine patio cover kits fixed covers who would like the look and durability this traditional outdoor structure.

Timberline patio covers llc can help you create amazing outdoor living spaces for your home call in the seattle area today. The outdoor living experts at hgtvm provides structure over back patio for outdoors a large awning covers deck to make, patio covers are structures that open air while providing protection from direct sunlight they a great option if your outdoor space is flooded with. Looking to provide a roof or some type of shade structure your outdoor living area consider installing patio cover with our popular covers you can. Pergolas the perfect patio and garden structures there are also a number of outdoor such as arbors archways that commonly used in gardens often, every patio can become an extension of indoor living space especially if it has a roof cover wooden structures be put in place to covered with standard, pictures of outdoor covered patio ideas and simple design plans including most popular covers enclosures awning canopy roofing umbrellas.

Stylish Beige Patio Roof

This patio roof complements the exterior very well. The soft beige color provides a relaxed ambiance to the patio so that it can be a great place to call it a day.

The pergola style allows natural light pass through which makes the patio shaded partially. You will not miss the warm of the sun when sitting in the patio.

Also Check: How To Build A Patio Swing Frame

Placement Of Header Determines Level Of Roof

Start With Ledger Board

A ledger/header board is the first step if you are attaching the patio roof to an existing structure. The placement of the ledger/header determines the level of the roof, so be sure it is positioned at the correct height and is horizontal. When fastening ledger/header boards to wood, the ledger should be held securely with bolts through the wall or lag screws.

Installing The Ledger Board

First I removed the 1/4 plywood dressing right below the drip edge and saw a very solid framing 2×4 underneath, perfect for attaching the ledger board, which attaches the cover to the roof frame. The local building code required a 2×6 ledger board, which meant I had to saw off two inches of wood from the top of the bay windows box. Next, I pre-drilled 1/8 holes, 6 inches apart, in the ledger board, because it was treated lumber and the deck screws would need a little help getting started. After attaching the ledger board with 4 decking screws, I used a large staple gun to staple the phone, internet, and cable lines to it, on the inside toward the house, to better protect them from the weather.

Post hole position and completed post hole

Also Check: How To Keep Patio Furniture From Blowing Away

Plan Ahead To Avoid Construction Headaches

You can add this screened in porch to almost any house, but attachment details may vary from what we show here.

• On most two-story houses, you won’t have to worry about tying into the roof, but you may have to situate the porch carefully to avoid covering a window.
• The house roof sloped 5 in. per foot and extended 18 in. at the overhang. Your roof may vary from this, and the details of how the porch ties in will vary as well.

These illustrations above show the plans for the screened in porch, deck framing, gable framing, ledger, truss block, side walls and the end wall. To print these how to build a porch plan, see Additional Information at the end of this story.

Complex Cavernous Or Customized Leave It To The Pros

Working with a licensed contractor significantly increases your investment, but also buys you peace of mind. Their intimate understanding of materials, structural integrity, mathematics and local building codes ensures that youll get a patio cover that not only pleases the eye but stands up to the weather and wont result in safety code infractions.

Here are the circumstances where its better to hire a contractor:

Pitched roof  The slant of your patio cover should fit aesthetically with the style of your home. For many, that means a serious pitch. If your patio cover requires an angle of any significance, design and installation will necessitate accurate mathematical calculation for safe installation. Let a professional contractor or engineer handle it.

Large areas As the size of the patio cover grows, the design may fall under different safety guidelines. As shear load increases, accurate engineering and construction becomes critical.  Work with an engineer and/or contractor to make sure that your patio cover is not only safe in all weather conditions, but also meets all state and local building code requirements.

Thinking of sprucing up your backyard with a new patio cover? Our experts can help. Bring your ideas and reference photos down to your nearest J&W Lumber and lets begin brainstorming.

Read Also: How To Lay A Brick Patio Over Concrete

How To Build A Freestanding Patio Cover

Building a freestanding patio cover is not that hard, but it is not that easy, either. It requires, at least, intermediate carpentry skills.

If you are a complete novice at carpentry, you had better get someone that has more experience in carpentry to help you.

Before building a freestanding patio cover, you have to prepare the materials needed.

Supply List:

• Screwdriver

Cost To Screen In A Covered Patio

If your patio has a hard cover, meaning not an awning or one of fabric, and it is solid, not louvered or a pergola, you can screen the sides. This essentially creates a patio enclosure, which helps keep bugs, the sun, and the rain out. The cost to screen a patio is $5 to $7 a square foot if the patio already exists. Building a covered, screened-in patio averages $30 to $47 a square foot, depending on the patio material you choose and the cover.

You May Like: How To Build A Concrete Deck Patio

Cut Away The Overhang And Siding To Make Way For The Porch

You’ll have to decide whether to cut a slot where the porch walls meet the siding. If your siding is stucco, brick or stone, you may want to butt the walls to the siding.

Make a mark 1-5/8 in. out from the deck on both sides. Then make another mark 5-1/8 in. inside the first mark. Draw plumb lines up from these marks and cut a 5-1/8-in. slot through the siding but not the sheathing. Set the saw blade just deep enough to cut through the siding only. Remove the siding. Waterproof the slot with No. 15 building paper.

Cost To Build A Covered Patio By Location

Most patios are located beside the home. This makes them easily accessible and still leaves plenty of space for the rest of the yard and landscaping. But patios can be located elsewhere on the property, particularly if you want them located beside another feature like a pool, tennis court, or fountain.;

The patio cover can also have different positions. If the patio is located beside the home, the cover can be either attached to the home, extending out over it, or it can be freestanding. When the patio is moved away from the home, the patio must be freestanding, limiting your choices for the cover. Both attached and freestanding covered patios have a wide range of costs because patios and covers come in many sizes and materials.

You May Like: How To Prevent Birds From Pooping On Patio Furniture

Where The Patio Cover Attaches To The Roof

More detail about joining the patio cover to the existing roof.

Jed Fisher

This article is accurate and true to the best of the authors knowledge. Content is for informational or entertainment purposes only and does not substitute for personal counsel or professional advice in business, financial, legal, or technical matters.

Where Should You Build Your Patio Cover

While the answer to this question seems obvious , there are shade and functional considerations that need to be taken into account.  Most patios are typically off the back door but that location may not provide an adequate shaded area.  Covered patios are ideal for outdoor living areas, dining areas, built in fireplaces or outdoor kitchens. It is best to consult with a design professional to determine where the maximum amount of shade and functionality can be achieved in your backyard with your new patio cover.

One other major factor in location of any new structure is city building codes and Home Owners Associations restrictions.  All cities have certain guidelines pertaining to where an attached or detached structure can be built.  In addition to the City requirements, HOAs will have a set of guidelines pertaining to design, finish material and height restrictions among other things.  Once again, it is best to consult a design professional that is familiar with your citys requirements and HOA guidelines.

Read Also: How To Restore Cast Aluminum Patio Furniture

Diy Patio Cover Size & Cost

The patio area to be covered is fairly large, 24X12, so spanning it became the major obstacle.  The two choices were to run 12 beams and then get 24 engineered trusses to cover the span, or run 24 beams and run 12 2X8s to span the 10 gap.  If we had chosen the former, we would have gone with a gabled ceiling trimmed out with tongue and groove cedar, and covered with asphalt shingles.

In the end, the cost differential was substantial enough that the latter was a better choice.  The final cost including all the finishing materials was just under $2000.

Where To Attach A Patio Roof Ledger

On a one-story house, it is often best to attach the ledger for a patio roof just below the houses eaves.

On a two-story house, you can usually tie the ledger into a band joist , located between the floors, as shown below. Find the band joist by measuring down from a second-story window.

Browse Tools for This Project on Amazon

You May Like: How To Attach Patio Cover To House

Tips For Joining The Screened In Porch And House Roofs

If you’re not sure how to neatly join the screened in porch and house roofs:

• We recommend hiring an architect to help work out the details.
• Another option is to build a full-size mockup of a roof truss out of inexpensive and lightweight 1x4s. Figure out where the top of the wall plate would be if you built the porch according to our plans . Then support the mocked-up truss at this height to see how the porch overhang meets the roof.
• If you don’t like the way the overhangs intersect, adjust the level of the deck slightly, alter the wall height or change the width of the overhang.
• Contact your local building inspections department to find out what’s required to obtain a building permit.
• Start this process at least a month before you plan to build. This will allow enough time to work through potential problems.

Some Steps On How To Attach A Patio Roof To An Existing House

Attaching a patio roof to an existing house is not a doddle, but it does not mean that you cannot do it. You just need some assistances of experts if you are not really good at carpentry.

Before attaching a patio roof to your home, you need to prepare some materials such as:

• Nail gun
• Ledger

Steps:

• Measure the sightline clearance height from the roof to the house, not the other way around.
• Measure the size of the beam that you are going to use.
• You can either remove the eave or just keep it.
• Using lag bolts and a screwdriver, fasten the base of the posts to the ground. You have to make sure that they sit plumb.
• Make a cutting on one of the sides of the horizontal roof beam on an angle. You have to do it thoroughly so that the rafters sit flush on it.
• Attach the horizontal beam by using a nail gun. After that, to make it flush with the roof of the existing house, cut the two outer rafters.
• Now you can begin assembling the outer rafters and attaching the rafter beam to the edge of the roof of the house.
• Cut each of the house ends while continuing installing the rafters so that they fit the top of the rafter beam perfectly.
• When all the rafters are installed correctly, form your patio roof by attaching the planks horizontally across the rafters.
• If you are going to use shingles to cover the patio roof, do not forget to install black roofing felt along with a single layer of oriented strand board. When they are installed, you can begin attaching roofing shingles.

Read Also: How To Build A Raised Patio With Retaining Wall

Get Rid Of The Moisture

Wooden posts are prone to deterioration due to pests and moisture. To hold such damage at bay, you can try adding some gravels or crushed stone to each hole that you just dug out.

Add the gravels into the holes to a depth of three inches then tamp down the layer. After that, pour another three inches of gravel into the holes and tamp them down again.

Freestanding Patio Cover With Traditional Accent

This patio provides a bit traditional accent to your backyard. It is like the ones that you can encounter in Bali.

The stained wooden posts give a more natural and impressive look to the patio. The exposed beam ceiling makes the patio look more attractive although it does not feature sophisticated patterns.

The black roof shingle plays an important role in creating the traditional ambiance. It suits the chairs perfectly.

Since the roof slopes down from the center, it does not accumulate water, snow, and leaves which makes it easier to clean.

Read Also: How To Clean Cement Off Patio Slabs

Fiberglass Freestanding Patio Cover

This all-white patio perches on four stone posts. The rounded white posts look elegant and suit the window trims very well.

The beams feature curvy edges that make the patio look more attractive. And the fiberglass roof is just nice. It protects you from the rain, but it does not hinder you from getting the sunlight.

Modern Industrial Entry Courtyard

An entry courtyard for a home-based work/art studio designed by Homes by Monticello in Missouri features cedar decking and slat walls. A corrugated plastic roof adds rain protection and allows natural sunlight to filter through. The home is built around a grain silo, giving it a “modern industrial” sensibility. 

You May Like: How To Make A Flagstone Patio With Grass

How Big Should Your Patio Cover Be

The old adage Form follows function fits perfectly when we try to answer this question. The size of your new structure will vary depending on the space it is intending to cover.  Careful consideration must be made for furniture size to ensure there is adequate circulation around any columns or posts.  Furthermore, you will need to make sure you get the desired amount of shade from you new patio cover.

In addition to length and width, height of the new patio cover will also need to be considered.  A typical arbor or covered patio can vary from eight to eleven feet tall. One of the pros of a shorter patio cover is you will be able to maximize the amount of shade. One drawback of these type of structures is it may start to feel cramped.  The higher covered patio will feel more open but you will lose some of the shade coverage.

Fiberglass Patio Cover Cost

The cost of a fiberglass patio cover is between $16 and $39 a square foot installed. Fiberglass is one of the materials considered to be the gold standard by many contractors. It is attractive, durable, and very easy to maintain. Fiberglass comes in lattice, pergola, panel, and many different styles, colors, and shapes. Fiberglass is sometimes combined with other materials to give it greater durability. It is also a good insulator, making it a useful option for roofs where the sun is directly overhead.

Recommended Reading: How To Keep Spiders Away From Patio

Insulated Patio Roof Panels Cost

The cost of an insulated patio roof ranges from $26 to $59 a square foot installed. Insulated patio roof panels help prevent the patio from becoming overheated. This is a particularly good idea if your patio has some type of enclosure or walls like a gazebo. Insulated panels can be made of fiberglass, aluminum, or wood. They come in several different styles and can be added to many different types of roofs or covers. The material being insulated and the overall structure style dictate the final cost.

Attach 2x2s Over The Framing

After you stretch and staple each section, cut off the excess screen with a sharp utility knife. Then cover the edges with 2×2 trim pieces. We screwed these on to allow for easy removal for future screen repairs, and the trim covers the staples along all of the edges. Frame and screen the outer gable end following Figure C.

Screen door details:

If you use a wood door like ours, start by trimming it just enough to fit in the opening. Then set it in place and mark the door for final fitting. Use a sharp plane or belt sander to trim the door. You may have to repeat this process a few times to get a good fit.

Nail 1/2 x 2-in. wood stops to the framing at the door opening. Then hang the door using galvanized or brass screen door hinges. Mount a latch and door closer to complete the job. Plus, check out these other 10 inviting screen porches, rooms and lanais.

Additional Information:

You May Like: Can You Use A Patio Heater In A Screened Porch

Attach Trim And Sill To The Outer Walls

Nail a 2×10 trim board over the outside joist, 1-1/2 in. below the top surface of the deck. Cut a 2×4 sill piece to width and bevel the top on a table saw. Miter the ends and nail the sill to the top of the 2×10 trim board.

This illustration shows how the corners are assembled and the trim is installed.

How To Build A Diy Covered Patio

Youll be able to enjoy your backyard while protecting yourself from the sun when you learn how to build a DIY covered patio in this detailed tutorial.

I have a special treat for you today! My brother-in-law, Curt is sharing his first guest post here at Ideas for the Home by Kenarry®. He and his wife built an amazing covered roof for their patio to provide a little shade and rain protection in their backyard. I think it looks incredible and was thrilled when Curt told me he wanted to share a tutorial for how to build a DIY covered patio on Ideas for the Home by Kenarry®. Ill let Curt take it from here!

Disclosure: This blog post contains affiliate links for products or services we think youll like. This means if you make a purchase from one of these links, well make a small commission at no additional cost to you so we can keep the great ideas for the home coming your way. All opinions expressed are our own, derived from our personal experience.

It is that time of the year when I start planning my summer projects.  Most of the year I spend my time teaching English: grammar, styled writing, paragraph frameworks and a smattering of really good literature, but in the summer I am able to get my hands dirty and build stuff.  This year I picked two major projects.  The first is going to be a covering for our outdoor patio, and the second will be a natural swimming pond. This post will be covering the former and you can check out our DIY pond here.

Also Check: How To Get Paint Out Of Patio

Via https://www.lovemypatioclub.com/how-to-build-a-covered-patio-attached-to-house/